This synopsysinstaller_INSTALL_README.txt document contains installation instructions for
the Synopsys Installer tool in the following sections:
* General Information
* Installation Procedure
* Using the Installer (EST / FTP Users Only)
* Post-Installation Steps
* Installing From a CD
* Suppo.....
Language : english Authorization: Pre Release Freshtime:2010-07-08 Size: 315 MB
CST proudly announces the upcoming release 2010 of its electromagnetic simulation software
CST STUDIO SUITE™. With over 60 man years of research and development and over 3000 functional changes, CST STUDIO SUITE 2010 again sets the standard for electromagnetic simulation software.
The focal points .....
Language : english Authorization: Pre Release Freshtime:2010-07-08 Size: 2.4 GB
Mentor Graphics PADS 9.2
The PADS 9.2 Program is set to begin. You are receiving this e-mail because you have expressed an interest to participate in this beta program, or you have participated in a past program.
PADS 9.2 is currently scheduled for production release in June 2010. The primary enh.....
Language : english Authorization: Pre Release Freshtime:2010-07-07 Size: 1.5 GB
Filed under: PCB Layout and routing, PCB design, SPB, Allegro PCB Editor, Constraint Manager, via, PCB Editor, PCB, SPB 16.3, Allegro 16.3, "PCB design", SPB16.3
Current design technologies require extremely tight matching requirements right down to the overall net topologies to ensure that any dev.....
Language : english Authorization: Pre Release Freshtime:2010-07-07 Size: 399 MB
SoC GDS offers an intuitive user interface, providing
advanced productivity enhancing functionalities, throughou
the design creation and validation chains.
SoC GDS addresses a wide range of needs, from quick and
easy layout viewing, to final insertions of cells before
.....
Language : english Authorization: Pre Release Freshtime:2010-06-30 Size: 47 MB
SMASH is the reference Analog and Mixed-Signal (AMS), Logic
and Mixed-Signal (LMS) and All-in-One Simulator enabling
truthfully the combination of digital, logic and analog
multi-domain modeling with no need for a cosimulation
backplane, as well as Instruction Set Simulatio.....
Language : english Authorization: Pre Release Freshtime:2010-06-30 Size: 132 MB
Calibre® is the overwhelming market share leader and the industry standard for IC physical verification, due to the outstanding performance, accuracy and reliability of Calibre products. Over the last two years, Calibre nmDRC™ has reduced average DRC runtime by a factor of five, while Calibre's in.....
Language : english Authorization: Pre Release Freshtime:2010-06-29 Size: 967 MB
FloTHERM enables engineers to create virtual models of electronic equipment, perform thermal analysis, and test design modifications quickly and easily before any physical prototypes are built.
FloTHERM uses advanced CFD techniques to predict airflow, temperature, and heat transfer in components, b.....
Language : english Authorization: Pre Release Freshtime:2010-06-28 Size: 358 MB
This document describes how to install the HSPICE product.
Note:
The installation instructions in this document are the most up-to-date
available at the time of production. However, changes might have occurred.
For the latest installation information, see the product release notes or
documentation.
.....
Language : english Authorization: Pre Release Freshtime:2010-06-24 Size: 146 MB
Want a powerful, yet easy to use simulation environment?
SynaptiCAD's simulation and debugging tools provide a
standard interface for controlling all of your simulation
tools. SynaptiCAD's timing diagram editors .....
Language : english Authorization: Pre Release Freshtime:2010-06-24 Size: 125 MB
CoWare announced the 2010.1 release of CoWare SPW products. The SPW 2010.1 release advances the LTE (Long Term Evolution) Wireless Reference Library and adds a complete Xilinx implementation flow that includes direct source translation technology from C Data Flow (CDF) into RTL. The CoWare SPW 2010......
Language : english Authorization: Pre Release Freshtime:2010-06-23 Size: 304 MB
Synplify Premier
The Synplify Premier solution is the industry's most productive FPGA implementation and debug environment. It includes all the features of Synplify Pro and additionally provides a comprehensive suite of tools and technologies for advanced FPGA designers as well as ASIC prototypers t.....
Language : english Authorization: Pre Release Freshtime:2010-06-22 Size: 213 MB
CX-Supervisor is dedicated to the design and operation of PC visualisation and machine control. It is not only simple to use for small supervisory and control tasks, but it also offers a wealth of power for the design of the most sophisticated applications.
CX-Supervisor boasts powerful functions f.....
Language : english Authorization: Pre Release Freshtime:2010-06-19 Size: 410 MB
New in Simplorer v8.1
* ANSYS Icepak® and ANSYS Mechanical® coupling
* State Space Modeling Capability
* Simplorer stand alone or Maxwell Transient co-simulation Saved States
* Set Assignments
* Dynamic Updates for Plots
* Enhanced "Output Dialog" window
* Evaluated Va.....
Language : english Authorization: Pre Release Freshtime:2010-06-14 Size: 254 MB
Maxwell V13.0 and RMxprt V13.0 contain many new capabilities and enhancements as:
ANSYS Workbench Couplings
* Thermal Coupling (one-way and two-way)
* Structural Coupling (one-way)
* Design Exploration Coupling
New Capabilities
* New Adaptive Mesh Refinement for 3D Eddy Solve
.....
Language : english Authorization: Retail Freshtime:2010-06-14 Size: 284 MB
The VSM Advantage
The Proteus Design Suite is wholly unique in offering the ability to co-simulate both high and low-level micro-controller code in the context of a mixed-mode SPICE circuit simulation. With this Virtual System Modelling facility, you can transform your product design cycle, reaping .....
Language : english Authorization: Pre Release Freshtime:2010-06-11 Size: 65 MB
Installing CustomExplorer and Custom WaveView
This document describes how to install the CustomExplorer and Custom
WaveView product.
Note:
The installation instructions in this document are the most up-to-date
available at the time of production. However, changes might have occurred.
For the latest .....
Language : english Authorization: Pre Release Freshtime:2010-06-11 Size:
Want a powerful, yet easy to use simulation environment?
SynaptiCAD's simulation and debugging tools provide a
standard interface for controlling all of your simulation
tools. SynaptiCAD's timing diagram editors have the most
extensive and accurate timing analysis features.....
Language : english Authorization: Pre Release Freshtime:2010-06-10 Size: 125 MB
Monitoring the integrity of the project allows you to track changes in the parts of the project and synchronize them. Using the fee debugging NanoBoard possible to debug FPGA projects at the stage of creation of the concept.
Altium Designer provides an opportunity to abandon the problems associated .....
Language : english Authorization: Pre Release Freshtime:2010-06-07 Size: 1.18 GB
EXT91 is ok for use with ASSURA32USR2_HF and above but some features such as the usage of a non-existent net "0" as the ground net requires ASSURA41_HF3 and above. As ASSURA32 is quite out-dated, please download the latest version of Assura41. I would also think that it is better to upgrade to IC614.....
Language : english Authorization: Business Freshtime:2010-06-07 Size: 2.8GB
Xilinx introduced the ISE?Design Suite 12 software to enable
breakthrough optimizations for power and cost with greater design
productivity. For the first time, ISE design tools deliver 'intelligent'
clock-gating technology that reduces dynamic power consumption by as
much as 30 percent. Th.....
Language : english Authorization: Business Freshtime:2010-06-04 Size: 2.8 GB
Ucam CAM++
Powerful, fast and error-free tool generation, automated integration with costing & planning systems. In-built dynamic automation and a user-interface structured for advanced manufacturing technologies ensure a fast roll-out.
Ucam uFlex
Powerful tool-sets help product engineers develo.....
Language : english Authorization: Business Freshtime:2010-06-03 Size: 185 MB
DSP Builder technology allows you to go from system definition/simulation
using the industry-standard The MathWorks/Simulink tools to system
implementation in a matter of minutes.
The DSP Builder Signal Compiler block reads Simulink Model Files (.mdl) that
are built using DSP Builder and Meg.....
Language : english Authorization: Business Freshtime:2010-06-01 Size: 160 MB
Electromagnetic Professional (EMPro) 2010 is Agilent EEsof EDA's software design platform for analyzing the 3D electromagnetic (EM) effects of components such as high-speed and RF IC packages, bondwires, antennas, on-chip and off-chip embedded passives and PCB interconnects. EMPro features a modern .....
Language : Authorization: Pre Release Freshtime:2010-05-30 Size: