Marcus Bole PolyCAD brings together the best selection of hull surface design techniques together within a user interface which allows the extensive manipulation of geometry in 3D dimensions. The software supports the direct manipulation of NURBS surfaces, parametric hull generation and advanced .....
Language : english Authorization: Retail Freshtime：2009-10-31 Size: 7MB
The PROKON suite of structural analysis and design software is developed by engineers for engineers. Used worldwide in more than eighty countries, the suite provides quick and reliable answers to everyday structural and geotechnical engineering problems:-Frame and finite element analysis.-Steel m.....
Language : english Authorization: Retail Freshtime：2009-10-30 Size: 113MB
Newly upgraded to ACI 318-08 and renamed from pcaSlab and ADOSS, spSlab v3.00 is highly efficient and widely used for analysis, design and investigation of reinforced concrete floor systems. Save in both material and labor using the moment redistribution feature. It allows up to 20% reduction of .....
Language : english Authorization: Retail Freshtime：2009-10-30 Size: 24MB
Newly upgraded to ACI 318-08 and renamed from pcaBeam, spBeam v3.00 is highly efficient and widely used for analysis, design and investigation of beams and one-way slabs in reinforced concrete floor systems.As a limited edition of spSlab, spBeam features torsion effects in the shear design and in.....
Language : English Authorization: Retail Freshtime：2009-10-30 Size: 24MB
Widely used for design of shear walls, bridge piers as well as typical framing elements in buildings, spColumn (formerly pcaColumn, PCACOL, IrrCOL) can investigate sections that are impossible to find on design charts or do by hand.spColumn, formerly pcaColumn/PCACOL/IrrCOL, is for the design and.....
Language : English Authorization: Retail Freshtime：2009-10-30 Size: 10MB
From commercial building foundations to industrial mats and slabs on grade, engineers worldwide use spMats (formerly pcaMats, MATS) to optimize complicated foundations design, reinforcing and soil-structure interaction.spMats, formerly pcaMats/MATS, is for analysis and design of concrete foundati.....
Language : English Authorization: Retail Freshtime：2009-10-30 Size: 14MB
From shear walls to tilt-up, precast, and ICF walls, engineers worldwide use spWall (formerly pcaWall, PCA-Tilt, TILT) to optimize complicated wall design, reinforcing, and deflections.spWall, formerly pcaWall/PCA-Tilt/TILT, is for design and analysis of reinforced concrete walls, tilt-up walls, .....
Language : english Authorization: Retail Freshtime：2009-10-30 Size: 14MB
GMS is a comprehensive groundwater modeling environment with GIS based graphical preprocessing tools to automate and streamline the modeling process. GMS seamlessly interfaces with MODFLOW and several other preeminent groundwater models, and provides advanced graphical features for viewing and cali.....
Language : english Authorization: Retail Freshtime：2009-10-25 Size: 203MB
NGA and Geosoft are pleased to announce the release of GMSYS-3D Gravity and Magnetic Modeling package for Windows.Geoscientists can use GMSYS-3D to quickly build three dimensional, grid-based earth models and calculate the gravity and magnetic response of their model. Users can plot 3D displays o.....
Language : English Authorization: Pre Release Freshtime：2009-10-24 Size: 7.5MB
The theoretical concepts used in the PYWALL software extends beyond the conventional method of analysis and design of flexible retaining walls based on limit-equilibrium theory. As a difference to conventional pratice, the PYWALL method does not ignore the effects of soil-structure interaction.Mo.....
Language : english Authorization: Retail Freshtime：2009-10-24 Size: 4.2MB
Bentley HEC-Pack v8i 08.11.00.00 —明渠水文水资源工程软件包Bentley provides thousands of engineers with HEC software, documentation, and support for a variety of modeling tasks, from floodplain hydrology to river analysis to GIS integration. These important programs are all included in the H.....
Language : English Authorization: Pre Release Freshtime：2009-10-24 Size: 287MB
Key new features in SewerCAD V8i SELECTseries 2 include:
HYDRAULICS
Model treatment plants, hatcheries, and irrigation systems with new conduit properties, including weirs, orifices, and depth-flow curves, are now available in SewerCAD.
UPDATED CAD INTEROPERABILITY
Improved MicroStation integratio.....
Language : english Authorization: Pre Release Freshtime：2009-10-24 Size: 57MB
ewerGEMS is a fully-dynamic, multi-platform, sanitary and combined sewer modeling solution. Engineers can analyze sanitary or combined conveyance sewer systems using built-in hydraulic and hydrology tools and a variety of wet-weather calibration methods. From urban sewer planning to overflow remedia.....
Language : english Authorization: Pre Release Freshtime：2009-10-24 Size: 106MB
StormCAD provides comprehensive modeling for the design and analysis of storm sewer systems using a peak flow (Rational Method) approach. StormCAD provides calculations for catchment runoff, gutters, inlets, conduit networks, and outfalls; and its intuitive interface makes the design and analysis of.....
Language : english Authorization: Retail Freshtime：2009-10-24 Size: 68MB
DEFORM is the most widely used metal forming process simulation software worldwide! To serve our broad user base, SFTC offers a range of systems and modules to ensure that your DEFORM System meets your simulation requirements.
DEFORM is used for forging, cold heading, machining, heat treatment, .....
Language : english Authorization: Retail Freshtime：2009-10-23 Size: 368MB
Mechanical Simulation TruckSim 7.01 Release!TruckSim is a software tool for simulating and analyzing the dynamic behavior of medium to heavy trucks, buses and articulated vehicles. It operates just like CarSim with a few important differences.Current version: 7.01Truck ModelsTrucks and buses use .....
Language : English Authorization: Pre Release Freshtime：2009-10-23 Size: 412MB
Bentley RAM CADstudio Release 03.00.00.00AutoCAD based program for generating structural drawings from a RAM Structural System Database. This version supports AutoCAD versions 2004 to 2009.RAM CADstudio is the missing link between the analytical model and construction drawings; RAM CADstudio help.....
Language : English Authorization: Retail Freshtime：2009-10-23 Size: 65MB
Z_SOIL.PC is a continuously upgraded geotechnical, foundation and underground flow engineering software based on the finite-element method and written in the MS-Windows environment. The program has been used with great success in forensic, analysis and design studies, covering without exception a.....
Language : English Authorization: Retail Freshtime：2009-10-21 Size: 65MB
GEODELFT MSHEET 7.9.2.1 is a tool used to design retaining walls and horizontally loaded piles. MSheet’s graphical interactive interface requires just a short training period, allowing the user to focus their skills directly on the input of sound geotechnical data and the subsequent design .....
Language : English Authorization: Retail Freshtime：2009-10-20 Size: 22MB
GEODELFT MPILE 4.2.3.1 enables the analysis of the three-dimensional behavior of single piles and pile groups, interacting via the pile cap and the soil, as a function of loading. MPile offers for this purpose a unique combination of the internationally accepted design rules of the API (American .....
Language : English Authorization: Retail Freshtime：2009-10-20 Size: 19MB
GEODELFT MDrill 5.1.5.1 enables the fast design of a pipeline configuration installed by the Horizontal Directional Drilling technique (HDD). In HDD three installation stages are considered: Pilot drilling Reaming the initial pilot borehole Pulling back the pipelineThe initial borehole i.....
Language : English Authorization: Retail Freshtime：2009-10-20 Size: 18MB
GEODELFT MWell 3.1.2.1 is a quick tool for drainage problems. Drainage is performed in well permeable soils called aquifers. Aquifers are separated by less permeable layers named aquitards. The drainage has direct effects on the aquifer in which it is situated. But also indirectly other aquifers .....
Language : English Authorization: Retail Freshtime：2009-10-20 Size: 8MB
GEODELFT MSEEP 7.4.2.1simulates two dimensional stationary groundwater flow in a cross section of layered soil structures or in one phreatic aquifer, composed of different material areas. In MSeep version 7.4 a new model has been implemented to determine Piping and Heave. It will be released in t.....
Language : English Authorization: Retail Freshtime：2009-10-20 Size: 10MB
GEODELFT MSTAB 9.10.8.6 is a slope stability package for soft soils. Delft GeoSystems’ tools follow best practice, and are developed according to modern software standards; therefore they are user-friendly and easy to learn. Program modules:MStab comes as a base module, which can be exten.....
Language : English Authorization: Retail Freshtime：2009-10-20 Size: 21MB