Found 269 query results that match 5.0
-
- DFMPro is a CAD integrated Design for Manufacturability & Assembly (DFM/A) solution which allows the designer to check his designs for producibility. DFMPro assists design engineers in identifying features of a design which are difficult, expensive and impossible to manufacture, at the design stage .....
- Language : english Authorization: Pre Release Freshtime：2014-01-23 Size: 1CD
-
- Electromagnetic Simulation Software
Electronics and electromagnetic engineering simulation softwareBecause ANSYS is the leading provider of electromagnetic simulation software, engineers rely on our electromagnetic field solvers and system simulation products to design communication and networking s.....
- Language : english Authorization: Pre Release Freshtime：2013-12-17 Size: 2DVD
-
- Generating the Design Space
Generating the design space is the first step in setting up a HyperShape/CATIA simulation. The full CAD modeling and GPS functionality of CATIA V5 is available to define design areas, directly apply loads and boundary conditions. The same model is used both to perform an .....
- Language : english Authorization: Retail Freshtime：2013-12-17 Size: 7CD
-
- Displacement Based Design
Traditionally, earthquake-resistant design has been strength-based, using linear elastic analysis.
Since inelastic behavior is usually allowed for strong earthquakes, this is not entirely rational.
Strength-based design considers inelastic behavior only implici.....
- Language : english Authorization: Retail Freshtime：2013-11-12 Size: 1CD
-
- utoForm
plus
R5 – A Wide Range of New F
eatures for Digital Planning
and Validation of Sheet Me
tal Processes and Parts
Wilen b. Wollerau, Switzerland, September 24, 2013: AutoForm Engineering GmbH, the
leading supplier of software solutions for the sheet metal forming industry, has
introduced the .....
- Language : english Authorization: Retail Freshtime：2013-10-20 Size: 1DVD
-
- SACS is an integrated suite of software that supports the analysis, design, fabrication, and installation of offshore structures, including oil, gas, and wind farm platforms and topsides. Its ability to dynamically iterate designs allows users to perform advanced analysis, comply with offshore desig.....
- Language : english Authorization: Pre Release Freshtime：2013-10-16 Size: 1CD
-
- Piping Design and Analysis Software for Productivity, Integration, and meets Nuclear Quality Standards
Advantages
Increased Productivity
According to the largest EPCs in the world, their turn-around time for pipe stress work was reduced between 20-50 percentage productivity gains by switching from.....
- Language : english Authorization: Retail Freshtime：2013-10-15 Size: 1CD
-
- in thousands of engineers worldwide and benefit from Tedds 2013
Access a large library of automated structural & civil calculations
Choose from a range of international codes
Use a single software solution for all common elements & materials
Use a simple and intuitive interface
.....
- Language : english Authorization: Pre Release Freshtime：2013-10-15 Size: 1CD
-
- Creo Elements/Pro (formerly Pro/ENGINEER), PTC's parametric, integrated 3D CAD/CAM/CAE solution, is used by discrete manufacturers for mechanical engineering, design and manufacturing.
Created by Dr. Samuel P. Geisberg in the mid-1980s, Pro/ENGINEER was the industry's first successful rule-based co.....
- Language : Multi Language Authorization: Retail Freshtime：2013-09-27 Size: 2DVD
-
- Advanced Project Risk Management and Schedule Risk Analysis Software
Project managers can use RiskyProject for planning, scheduling, quantitative and qualitative risk analysis, and performance measurement of projects with multiple risks and uncertainties.
Project risk management:
risk register
r.....
- Language : english Authorization: Pre Release Freshtime：2013-08-05 Size: 1CD
-
- VoluMill NEXION is the next generation of VoluMill Universal. It contains major enhancements to virtually every area of the product, from performance, to graphics, to the user interface, many of which are direct responses to input from our valued customers.
Redesigned Toolpath Manager
NEW Verificat.....
- Language : english Authorization: Pre Release Freshtime：2013-05-16 Size: 1CD
-
- VoluMill NEXION is the next generation of VoluMill Universal. It contains major enhancements to virtually every area of the product, from performance, to graphics, to the user interface, many of which are direct responses to input from our valued customers.
Redesigned Toolpath Manager
NEW V.....
- Language : english Authorization: Pre Release Freshtime：2013-04-04 Size: 1CD
-
- PERFORM-3D V5 Enhancements Subscribe RSS
A 64-bit version of the analysis engine is now utilized when Peform-3D is installed on a 64 bit computer. The 32-bit analysis engine is still used on 32-bit computers. The 64-bit engine allows larger problems to be solved, and tends to run faster than t.....
- Language : english Authorization: Pre Release Freshtime：2013-02-05 Size: 1CD
-
- The Most Accurate and Most Recognized Real-Time Material Cost Reduction Tool for Estimators and Tool Engineers
50 times faster and more accurate (1.4% vs 10% inaccuracy) than manual calculations; on average supplier variation between estimate and actual costs is 25%
Accurate material cost i.....
- Language : Multi Language Authorization: Pre Release Freshtime：2013-02-05 Size: 1CD
-
- VoluMill NEXION is the next generation of VoluMill Universal. It contains major enhancements to virtually every area of the product, from performance, to graphics, to the user interface, many of which are direct responses to input from our valued customers.
Redesigned Toolpath Manager
NEW V.....
- Language : english Authorization: Retail Freshtime：2013-01-07 Size: 1CD
-
- FEMFAT (Finite Element Method Fatigue) is the number one engineering software tool for fatigue life prediction.
FEMFAT is a tool designed to identify critical locations and supports the light weight optimization process at an early development stage, way before time- and cost-consuming tests will b.....
- Language : Authorization: Retail Freshtime：2012-11-08 Size: 1CD
-
- Siemens PLM Software announced the latest release of NX software, the company’s fully integrated computer-aided design, manufacturing and engineering analysis (CAD/CAM/CAE) solution. The latest version, NX 8.5, includes extensive customer-driven enhancements and new capabilities that provide increa.....
- Language : english Authorization: Retail Freshtime：2012-11-08 Size: 1DVD
-
- AFT Arrow is a fluid dynamic simulation tool used to calculate pressure drop and flow distribution in gas piping and ducting systems.
Designed for compressible flow systems containing:
•Steam
•Compressed air
•Chemical and petrochemical process gases
•Natural gas transport
•And many more
.....
- Language : english Authorization: Pre Release Freshtime：2012-10-10 Size: 28 MB
-
- Cadence OrCAD PCB design suites combine industry-leading, production-proven, and highly scalable PCB design applications to deliver complete schematic entry, simulation, and place-and-route solutions. With these powerful, intuitive tools that integrate seamlessly across the entire PCB design flow, e.....
- Language : english Authorization: Retail Freshtime：2012-08-03 Size: 1CD
-
- Cadence® Assura®v6 Physical Verification supports both interactive and batch operation modes with a single set of design rules. It uses hierarchical processing and multi-processing for fast, efficient identification and correction of design rule errors. Unique pattern-checking capabilities enable .....
- Language : english Authorization: Business Freshtime：2012-07-08 Size: 2DVD