FEMFAT (Finite Element Method Fatigue) is the number one engineering software tool for fatigue life prediction.
FEMFAT is a tool designed to identify critical locations and supports the light weight optimization process at an early development stage, way before time- and cost-consuming tests will b.....
Language : Authorization: Retail Freshtime：2012-11-08 Size: 1CD
ESI VA One product of ESI GROUP is intended for design and analysis of Vibration
The program allows to take into account the optimal characteristics of the noise and vibration at the design stage and ensure the implementation of vibro-acoustic requirements without the cost and weight increase.
The i.....
Language : english Authorization: Pre Release Freshtime：2012-11-02 Size: 1.6 GB
The integrated environment for functional performance simulation
LMS Virtual.Lab is an integrated suite of 3D FE and multi body modeling software which simulates and optimizes the performance of mechanical systems for structural integrity, noise and vibration, system dynamics and durability. Using .....
Language : Multi Language Authorization: Retail Freshtime：2012-10-23 Size: 2DVD
STAR-CCM+ provides the world's most comprehensive engineering simulation inside a single integrated package. Much more than just a CFD solver, STAR-CCM+ is an entire engineering process for solving problems involving flow (of fluids or solids), heat transfer and stress.
STAR-CCM+ is unrivalled in it.....
Language : Multi Language Authorization: Pre Release Freshtime：2012-10-10 Size: 965 MB
LMS Virtual.Lab offers an integrated software suite to simulate and optimize the performance of mechanical systems for structural integrity, noise and vibration, system dynamics and durability. LMS Virtual.Lab covers all the process steps and required technologies to perform an end-to-end design ass.....
Language : english Authorization: Retail Freshtime：2012-09-06 Size: 2DVD
Noise and Vibration analyzer 1 LMS SCADAS Mobile 3 Noise and Vibration analyzer 3
LMS Test.Xpress ——Integrated platform for noise, vibration and durability
Traditional analyzers are extremely flexible tools to qualify products’ noise, vibration or durability performances. They are e.....
Language : english Authorization: Pre Release Freshtime：2012-09-06 Size: 1CD
The COMSOL Multiphysics engineering simulation software environment facilitates all steps in the modeling process − defining your geometry, meshing, specifying your physics, solving, and then visualizing your results.
Model set-up is quick, thanks to a number of predefined physics interfaces for.....
Language : english Authorization: Pre Release Freshtime：2012-09-06 Size: 75 MB
The latest version of Virtual Performance Solution was developed to address today’s main industrial challenges. How to cope with new safety and environmental regulations for transportation, while reducing weight? How to anticipate the impact of new materials and manufacturing processes on product .....
Language : english Authorization: Retail Freshtime：2012-08-03 Size: 1CD
MEDINA/SDM -
Simulation under control.
Customer “best – practices – processes” are characterized by the use of different resources (soft-/hardware, special know-how bearer as user) which are optimized for the intended objective. Crucial points for the optimization of the overall product developm.....
Language : english Authorization: Retail Freshtime：2012-08-01 Size: 2CD
Altair Engineering's HyperWorks is a computer-aided engineering (CAE) simulation software platform that allows businesses to create superior, market-leading products efficiently and cost effectively.
HyperWorks provides the most comprehensive, open-architecture CAE solution in the industry, includi.....
Language : Multi Language Authorization: Retail Freshtime：2012-07-23 Size: 4.5 GB
The Basic Module of SimulationX software is the prerequisite module for usingthe platform for an integrated system design, modeling and analysis. Thetherein integrated TypeDesigner is the tool to adapt existing and to design own model element types, it can be also used as Modelica Smart Editor. Th.....
Language : english Authorization: Retail Freshtime：2012-07-08 Size: 1DVD
COMSOL announces the 4.3 release of COMSOL Multiphysics, its industry-leading software environment for modeling and simulating any physics-based system. COMSOL Multiphysics 4.3 empowers engineers, researchers, and scientists with powerful new modeling tools and fast simulations that further establis.....
Language : Multi Language Authorization: Pre Release Freshtime：2012-07-01 Size: 1DVD
SimLab is a process oriented, feature based finite
element modeling software that allows you to
quickly and accurately simulate engineering behavior
of complex assemblies. SimLab automates simulation-
modeling tasks to reduce human errors and time spent
manually creating finite element models and
in.....
Language : english Authorization: Retail Freshtime：2012-06-25 Size: 2CD
Bladed provides worldwide wind turbine and component manufacturers, certification agencies, design consultants and research organisations with a design tool that has been extensively validated against measured data from a wide range of turbines. It enables users to conduct the full range of perform.....
Language : english Authorization: Retail Freshtime：2012-06-20 Size: 1CD
The most powerful stamping analysis tool for blank development, process design, and incremental simulation combines: FASTFORM Advanced, FASTFORM MultiStage, and FASTIncremental
This seamless scenario covers the entire process from quoting to process design to virtual prove-out with speed and efficie.....
Language : english Authorization: Pre Release Freshtime：2012-06-14 Size: 1CD
New Cedrat Flux 10.4.2:
Improvement of CAD import:
. Updated with the new Acis R21 SP1 (ProE wildFire 5,…)
. CAD import process improved to take into account users previous difficulties
Reinforced link to mechanical studies to save time and avoid mistakes
Automatic geom.....
Language : english Authorization: Pre Release Freshtime：2012-06-02 Size: 815 MB
Visual-Mesh is a complete meshing tool which supports CAD Import, 2D and 3D Meshing and Editing features. Some of the features which work on ‘mesh only’ will be available in Visual-Crash PAM context.
Visual-Crash PAM (VCP), which is one of the contexts in Visual-Environment, provides PAM-CRASH u.....
Language : Authorization: Retail Freshtime：2012-05-18 Size: 2CD
To create a new model, follow the steps described in the example below. The geometry
created is a beam fixed at one end and simply supported to the other.
1. Once SAFI is started, a new untitled file is automatically opened.
2. You can save the file at any time by using the Save command of t.....
Language : english Authorization: Retail Freshtime：2012-05-17 Size: 613 MB
Abaqus 6.12
Abaqus 6.12 delivers on SIMULIA's strategic commitment to provide scalable, high-quality realistic simulation solutions with new capabilities and more than 100 customer-requested enhancements. SIMULIA customers in a wide range of industries — including aerospace, automotive, consumer pa.....
Language : english Authorization: Pre Release Freshtime：2012-05-17 Size: 2DVD
SimLab is a process oriented, feature based finite element modeling software that allows you to quickly and accurately simulate engineering behavior of complex assemblies. SimLab automates simulation-modeling tasks to reduce human errors and time spent manually creating finite element models and int.....
Language : english Authorization: Pre Release Freshtime：2012-05-08 Size: 2CD
SIMULIA offers an advanced simulation product portfolio, including Abaqus FEA, Multiphysics, Isight, and SIMULIA SLM. In addition, SIMULIA V5 and V6 solutions enable realistic simulation for both designers and design engineers currently working in the CATIA V5 or V6 environments. These integrated an.....
Language : english Authorization: Pre Release Freshtime：2012-05-03 Size: 3.8 GB
LMS Imagine.Lab AMESim offers a complete 1D simulation suite to model and analyze multi-domain, intelligent systems and predict their multi-disciplinary performance. Model components are described using validated analytical models that represent the system s actual hydraulic, pneumatic, electric or .....
Language : english Authorization: Pre Release Freshtime：2012-04-25 Size: 1DVD
NUMECA International is pleased to announce the release of FINE/Turbo v8.9.1 (including AutoGrid5 v8.9.1), the latest version of the high accuracy multi-block structured Navier-Stokes CFD software dedicated to internal, multi-stage rotating and turbomachinery flow simulations. This latest version fu.....
Language : english Authorization: Business Freshtime：2012-04-05 Size: 1DVD
Pointwise is a software solution to the top problem facing
engineering analysts: mesh generation for computational fluids
dynamics (CFD).
Quality - We designed Pointwise so users could be in control,
not the system. Whether .....
Language : english Authorization: Retail Freshtime：2012-03-27 Size: 2cd
The COMSOL Multiphysics engineering simulation software environment
facilitates all steps in the modeling process - defining your
geometry, meshing, specifying your physics, solving, and then
visualizing your results.
Model set-up is quick, thanks to a number of predefined physics
in.....
Language : Authorization: Retail Freshtime：2012-03-23 Size: 4.2 GB