Logopress3™ also includes powerful features to "Mount" (cut all openings in all plates) the cutting, bending and forming punches. Punch Mounting would be a huge amount of work without this dedicated feature since so many die components are involved which each needing different clearances. Logopress3™ easily manages this with only a few mouse clicks and dialog box settings. After you define the first one, Logopress3™ stores your preferences in order to save even more time for the next mounting. Punch Mounting - Punch Mounting : Cutting punches Automatic plate recognition Bending punches Coining management Forming punches Cut all openings in all plates Clearance management Relief type management (Tapered or Stepped relief) Store user defined preferences A Die Design package would not be complete without a specific and powerful Hole Chart Feature. Just a few mouse clicks will save a lot of dimensioning time. Hole Chart Feature. Obviously, Logopress3™ takes full advantage of SOLIDWORKS™ ease of use and power and includes many other dedicated tools based on our nearly 20 years of experience that will make today's modern die designers much more productive. In the end, you will be much more profitable. - Tool & Die Hole charts : Front side and back side holes in the same chart Automatic, complete and very detailed description of every hole in addition to the X and Y data for each tag and also the standard component going into that hole.