SAD / CAM / CAE System American company PTC (Parametric Technology Corporation) is a CAD system of the upper level and covers all areas of design, technological preparation of production and manufacturing. A wide range of possibilities unit three-dimensional modeling, high quality of the result and its resistance to subsequent changes made by the system Creo one of the leading CAD / CAM / CAE-systems, and have direct access to the system life cycle support product Windchill PDMLink translates Creo in the category of PLM-systems . 1. Open "ptc_licfile.dat" in text editor and replace 00-00-00-00-00-00 in every-feature with your real ptc_hostid (real ptc-hostid of your computer is shown in left bottom coner of PTC installer window) 2. Install PTC Creo 2.0 Mxxx. Wnen asked for license select "Nodelocked license file (No server running) and browse to "ptc_licfile.dat" 3. Install PTC Creo 2.0 Mxxx Distributed Services Manager (optional) 4. Run "PTC_Creo_Patcher_0.1_SSQ.exe" (on Vista/Win7 computers be sure to run it as Administrator). Click "Look For..", browse to Common FilesMxxx (by default C:Program FilesPTCCreo 2.0Common FilesMxxx) and click "Look For.." once again Click "Start" and wait for patcher info window "All files seem to be patched. Enjoy!" Click "OK" 5. If you have installed PTC Creo 2.0 Mxxx Distributed Services Manager Click "Look For..", browse to (by default C:Program FilesPTCCreo 2.0Distributed Services Manager) and click "Look For.." once again Click "Start" and wait for patcher info window "All files seem to be patched. Enjoy!" Click "OK"